Laboratory equipment and instruments ZIM TOCMASPRIBOR ALS-5, BK-12, VIKA PV-300, VSTSB-3, etc.

Automatic paddle mixer ALS-5

The laboratory mixer is used for the preparation of cement dough when determining the normal density of the mixture, the setting time and the uniformity of the change in the volume of the test material according to GOST 30744. The mixer is also used for the preparation of cement mortars, which are used in the manufacture of samples of beams according to GOST 30744 and in accordance with the requirements of the European standard EN196.

Tank for boiling test BK-12

The tank for testing BK-12 is designed to determine the uniformity of the change in the volume of cement according to GOST 30744 and meets the requirements of the European standard EN196. Scope of application — laboratories engaged in testing and certification of cements.

Two tubular electric heaters of various capacities are used to heat the water in the tank. The tank uses a control unit that automatically sets the mode of rapid boiling of water and the mode of maintaining water in a boiling state.

VIKA PV-300 device

The device, complete with a pestle, a long needle, a short needle, a ring and plates, is designed to determine the normal density of cement dough and the setting time, meets the requirements of GOST 310.3 and GOST 30744.

The device Vika PV -300 has a cylindrical metal rod that moves freely in the frame holder. A support device is used to secure the rod at the required height. The rod is equipped with a pointer for counting the movement of its relative scale attached to the frame. The scale of the VIC device has a division price of 1 mm.

Sampler PSMTSP-50/800

The sampler of bulk materials of cement production is designed for sampling raw flour, cement, etc. Sampling is carried out from vertical material pipelines with a free-falling homogeneous flow in cross-section.

The sampler is used in automated systems of analytical control of composition and properties, as well as in laboratory analysis of the composition and properties of bulk materials.

Shaking table VSTSB-3

The shaking table, complete with a mold and a nozzle, is designed for compacting cement mortar in the manufacture of sample beams for testing cements for bending and compression strength. The shaking table is included in the set of equipment for testing laboratories of cement plants, research institutes and educational institutions, meets the requirements of GOST 30744 and the European standard EN196-1.